Epson SureColor F6370 User Manual Download Page 29

Page: 29 / 135

Related tasks

Viewing and Changing Media Settings

After you load media in your product, you see a screen like this on your product control panel which lets
you view or change your media settings:

The media settings include the options selected and stored for each media bank or RIP setting you
created.

Do one of the following:

• If the displayed media settings are correct for the media you loaded, press the up or down arrow

button to select

Keep Settings Above

and press the

button.

• If you need to change the media settings, press the up or down arrow button to select

Change

Settings

and press the

button.

If you want your product to calculate the amount of media remaining based on the length of the roll
and the amount already printed, and display the approximate results on the product control panel,
set the

Remaining Setup

setting to

To change your media settings, select the setting you want to change and press the

button.

Then press the

back button and repeat this step to select additional settings as necessary.

When you finish changing media settings, press the up or down arrow button to select

Exit

and

press the

button.

Summary of Contents for SureColor F6370








































































































































Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands

Epson SureColor F6370, User Manual

Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands