Epson SureColor F6370 User Manual Download Page 89

Page: 89 / 135

12. Follow the instructions on the product control panel screen to open the printer cover and carefully

remove the pads when head maintenance finishes.

Note:

Do not reuse the pads.

13. Close the printer cover and press the

button to clean the print head.

Parent topic:

Print Head Maintenance

Related references

Maintenance Precautions

Related tasks

Removing Media

Cleaning the Anti-drying Caps

Clean the anti-drying caps at least once a week to remove any ink that may affect print quality. Be sure
you have a Cap Cleaning Kit handy.

Press the left or right arrow button to select the

tab and press the

button.

The Maintenance menu is displayed.

Press the up or down arrow button to select

Head Cap Cleaning

and press the

button.

The print head moves to the cleaning position.

Follow the on-screen instructions to open the maintenance cover.

Summary of Contents for SureColor F6370








































































































































Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands

Epson SureColor F6370, User Manual

Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands