Epson SF-510 User Manual Download Page 6

Page: 6 / 149

Contents

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Symbols in this Manual. . . . . . . . . . . . . . . . . . . . . . 8

Notes on Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Notes on using the product and components
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Notes  on  using  the  cradle. . . . . . . . . . . . . . . . . .  9
Optional  heart  rate  monitor. . . . . . . . . . . . . . . .  10

Notes on Electromagnetic Waves. . . . . . . . . . . . . . 10

Preparing and Basic Operations

Checking the Items Provided. . . . . . . . . . . . . . . . . 13

Basic Operations. . . . . . . . . . . . . . . . . . . . . . . . . . 14

Changing  screens. . . . . . . . . . . . . . . . . . . . . . .  14
Function  of  each  button. . . . . . . . . . . . . . . . . .  16
Tap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20
Alarm  (tones/vibration). . . . . . . . . . . . . . . . . .  20

Charging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Before use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Charging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Initial Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

About the battery. . . . . . . . . . . . . . . . . . . . . . . 28

Specifying a GPS (GPS Positioning). . . . . . . . . . . . 29

Measuring  function  for  the  device. . . . . . . . . . .  29
GPS  positioning. . . . . . . . . . . . . . . . . . . . . . . .  30
Indoor  mode  (SF-710/SF-510  only). . . . . . . . . .  31
Making  precise  measurements. . . . . . . . . . . . . .  32

Educating Your Stride Sensor. . . . . . . . . . . . . . . . 33

About the stride sensor. . . . . . . . . . . . . . . . . . . 33
Educating the stride sensor. . . . . . . . . . . . . . . . 33

Measurable Items. . . . . . . . . . . . . . . . . . . . . . . . . 34

Measure

Measuring Time, Distance, and Speed
(Chronograph Function). . . . . . . . . . . . . . . . . . . . 38

What  is  the  chronograph  function?. . . . . . . . . .  38
Measuring. . . . . . . . . . . . . . . . . . . . . . . . . . . .  39
Screen  display. . . . . . . . . . . . . . . . . . . . . . . . . .  41

Setting a Time and Distance for Hard and Light
Workouts (Interval Function). . . . . . . . . . . . . . . . 43

What is the interval function?. . . . . . . . . . . . . . 43
Setting interval conditions and measuring. . . . . 44

Loading interval conditions that have already
been set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Screen display. . . . . . . . . . . . . . . . . . . . . . . . . . 49

Measure until the Time or Distance Set in
Advance Is Reached (Goal Function). . . . . . . . . . . 50

What  is  the  goal  function?. . . . . . . . . . . . . . . . .  50
Measuring  by  setting  the  time  or  distance. . . . . .  51
Screen  display. . . . . . . . . . . . . . . . . . . . . . . . . .  53

Recording Laps Automatically (AT Lap
Function). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Automatically Start/Stop Measuring (AT Pause
Function). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Setting a Pace and Measuring (Target Pace
Function). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Setting and Measuring Waypoints (Waypoint
Function). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Registering waypoints. . . . . . . . . . . . . . . . . . . . 59
Specifying and measuring waypoints. . . . . . . . . 60

Checking Measurement Data (Recall
Function)

Checking Measurement Data. . . . . . . . . . . . . . . . . 63

Measurement data that can be checked in
recall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Delete unnecessary measurement data. . . . . . . . 64

Measuring Heart Rate (Heart Rate
Monitor)

Preparing to Measure Heart Rate. . . . . . . . . . . . . . 67

Preparing  the  heart  rate  monitor. . . . . . . . . . . .  67
Wearing  the  heart  rate  monitor. . . . . . . . . . . . .  67
Registering the heart rate monitor to the device
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  68
Enabling  the  heart  rate  monitor. . . . . . . . . . . . .  70

Measuring Heart Rate. . . . . . . . . . . . . . . . . . . . . . 72

Checking the communication status with the
heart rate monitor. . . . . . . . . . . . . . . . . . . . . . . 72
Displaying the measured heart rate screen. . . . . 72

Replacing the Battery for the Heart Rate Monitor
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Disabling the Heart Rate Monitor. . . . . . . . . . . . . 76

SF-710/510/310 User Manual

Contents

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands