Epson SF-510 User Manual Download Page 17

Page: 17 / 149

Measurement screen

Operation buttons

Button Operation

Explanation

Short press

You can display up to four measurement screens and switch the
screens using this button.

Long press (two

seconds or more)

Displays the time screen.

Not available while measuring.

Short press

Turns the light on or off. The light turns on for approximately 10
seconds.

Long press (two

seconds or more)

Displays the

Measure set.

menu.

Not available while measuring.

Short press

Starts, stops, or resumes measuring.

Long press (two

seconds or more)

Displays the time screen.

Displays the time screen if you use reset* while measuring is stopped.

Not available while measuring.

Short press

Records laps while measuring.

Long press (two

seconds or more)

Resets* while measuring is stopped.
Not available while measuring.

When you reset the display, it returns to the status before measuring started allowing you to start the next
measurement. Data that has been measured up to that point is stored in the device's memory.

SF-710/510/310 User Manual

Preparing and Basic Operations

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands