Epson SF-510 User Manual Download Page 60

Page: 60 / 149

Select an empty setting.

Use

to select, and then press

When

Complete

is displayed, press

Press

to resume measuring.

Note:

❏

You can register up to 40 waypoints.

❏

You can overwrite by selecting an item that
has already been registered.

Specifying and measuring
waypoints

Display the measurement screen.

Press

on the time screen.

GPS positioning starts, and the measurement
screen is displayed once positioning is complete.

“Specifying a GPS (GPS Positioning)” on

page 29

Display the

Measure set.

menu.

Hold down

on the measurement screen.

Select

Waypoint

Use

to select, and then press

Select

Use

to select, and then press

Select the registered waypoint.

Use

to select, and then press

Select

Use

to select, and then press

SF-710/510/310 User Manual

Measure

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands