Epson SF-510 User Manual Download Page 124

Page: 124 / 149

Display the

Measure set.

menu.

Hold down

on the measurement screen.

Select

Screen

Use

to select, and then press

Select

Screen4

Use

to select, and then press

Select

Pace&Graph

Use

to select, and then press

Screen Image is displayed.

After checking, press

and go to the following

step.

Select the interval at which to display
the screen.

Use

to select, and then press

Complete the settings.

Hold down

The measurement screen is displayed.

Press

on the measurement screen to change the

screen, and then check if

Screen4

has been

changed.

Note:

Hold down

on the measurement screen to display the

time screen.

Setting Lap/Target Pace/OFF

Here we will explain how to set

Lap

Screen4

Display the measurement screen.

Use one of the following methods to display.

❏

When performing GPS positioning:

Press

on the time screen.

❏

When skipping GPS positioning:

Press

on the time screen, and then select

Skip

on the GPS positioning screen.

“Skipping GPS positioning” on

page 30

SF-710/510/310 User Manual

Settings

124

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands