Epson SF-510 User Manual Download Page 52

Page: 52 / 149

Measuring

Start measuring.

Press

When the set time or distance is
reached, the "Finish" screen is
displayed.

The time, distance, and calories burnt are
displayed.

Note:

An alarm notifies you when you reach 50% and
90% of the set time or distance.

Stop measuring.

Press

while measuring.

Reset the measurement results.

Hold down

while measuring is stopped.

When you reset the display, it returns to the
status before measuring started allowing you to
start the next measurement.

Data measured up to that point is stored in the
device's memory, and you can check it by
pressing

on the time screen.

“Checking Measurement Data” on

page 63

Note:

To stop measuring and return to the time screen

❏

After resetting the measurement results in step 4,
hold down

❏

While the screen in step 3 is displayed while
measurement is stopped, hold down

. The

measurement results are reset and the time screen is
displayed.

❏

If no operations are made for 60 minutes on a screen
other than the measuring screen, the time screen is
displayed.

SF-710/510/310 User Manual

Measure

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands