Epson SF-510 User Manual Download Page 70

Page: 70 / 149

Enabling the heart rate monitor

When using the heart rate monitor, set

from

the

Measure set.

menu.

Operation buttons

Display the measurement screen.

Press

on the time screen.

GPS positioning starts, and the measurement
screen is displayed once positioning is complete.

“Specifying a GPS (GPS Positioning)” on

page 29

Displays the

Measure set.

menu.

Hold down

on the measurement screen.

Select

Use

to select, and then press

Select

Use

to select, and then press

Set the heart rate zone you want to
maintain while exercising.

Use

to select, and then press

An alarm sounds if you are outside the set heart
rate zone.

Note:

❏

You can check or change the value set for the
heart rate in each heart rate zone in

User

Settings

“User Settings” on page 112

❏

To turn off functions that notify you with an
alarm, select

OFF

Select Zone

Check the set content.

Press

Complete the settings.

Hold down

The measurement screen is displayed.

SF-710/510/310 User Manual

Measuring Heart Rate (Heart Rate Monitor)

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands