Epson SF-510 User Manual Download Page 113

Page: 113 / 149

Sys. Settings

Make settings for the device's system.

The value in brackets () is the default setting.

Setting items

Value

Explanation

Language

English (default)

Set the display language.

Deutsch

Units

km (default)

Set the display units for distance.

mile

Clock

12 Hour (default)

Set the format for the display time.

24 Hour

DST

Set Daylight Saving Time.

OFF (default)

Time Adjust

The device receives a signal from the GPS and
automatically sets the time.

Signals from the GPS cannot be received while indoors.
Make sure the screen is facing up and you are outside
with no obstructions overhead.

If GPS positioning has not completed after two minutes,
we recommend selecting

Cancel

, moving to a different

location, and trying again.

Time Zone

Auto (default)

Sets the time zone for your location.

When

Auto

is selected, perform

Time Adjust

to set the

time zone automatically.

When

Manual

is selected, you can set the time zone

within a range of -12:00 to +14:00.

Manual

Date Format

Day. Month

Set the display format for the date.

Month. Day (default)

Invert Disp.

Set the display format for the screen.

When

is selected, white text is displayed over a black

background.

When

OFF

is selected, black text is displayed over a white

background.

OFF (default)

SF-710/510/310 User Manual

Settings

113

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands