Epson SF-510 User Manual Download Page 72

Page: 72 / 149

Measuring Heart Rate

When

is set to

from the

Measure set.

menu, you can use the heart rate monitor to measure heart rate in the

chronograph, interval, and goal functions. See the following pages for information on each function.

“Measuring Time, Distance, and Speed (Chronograph Function)” on page 38

“Setting a Time and Distance for Hard and Light Workouts (Interval Function)” on page 43

“Measure until the Time or Distance Set in Advance Is Reached (Goal Function)” on page 50

Checking the communication status with the heart rate monitor

You can check the communication status of the heart rate monitor from the icon on the measurement screen.

is flashing, check that you are wearing the heart rate monitor correctly.

Measurement screen: Chronograph

On: Communicating with the heart rate monitor.

Flashing: Cannot communicate with the heart rate

monitor.

Displaying the measured heart rate screen

The heart rate measurement item is not displayed by default. Change the screen settings to display the heart rate
item.

“Screen” on page 115

List of measurement items displayed (items related to heart rate)

Display item

Display name

Explanation

1 Line

2 Lines/3 Lines

Current heart rate

Average HR

Avg.HR

Av.HR

Average heart rate from the start of
measurements

Maximum HR*

Max.HR

Maximum heart rate from the start of
measurements

Lap HR

LapHR

Average heart rate for each lap

SF-710/510/310 User Manual

Measuring Heart Rate (Heart Rate Monitor)

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands