Open the carrier sheet and place the document inside on the top-center of the carrier
sheet.
If the document is larger than letter- or A4-size, neatly fold the document with the printed
side facing outward.
Load the carrier sheet into the input tray with the printed side facing down and the top
edge facing into the feeder.
If you placed a folded document into the carrier sheet, load the carrier sheet into the input
tray with the left side of the original document facing down and the top edge facing into
the feeder.
Slide the carrier sheet into the feeder until it meets resistance. Then slide the edge guides
over to fit the edges of the carrier sheet.
To start scanning, see
Starting a Scan Using Epson Scan
for instructions.
Summary of Contents for Pro GT-S80
