Epson PowerLite 400W User Manual Download Page 78

Page: 78 / 120

Maintenance and Transportation

7. Gently insert the new lamp along the guide rail. If it doesn’t fit

easily, make sure it’s facing the correct way. Push the lamp down
firmly where the label

PUSH

appears.

8. Once the lamp is fully inserted, tighten its screws.

9. Lower the lamp cover into place. (The opening should be almost

covered, and the top of the cover should be flush with the top of
the projector.) Then slide the cover closed and tighten the screw.

10. Reset the lamp timer as described in the next section.

caution

Do not touch the glass
portion of the lamp
assembly. Touching the glass
could result in premature
lamp failure.

note

Be sure to seat the lamp fully
and secure the lamp cover. If
the lamp is not properly
installed or the cover is loose,
the lamp will not turn on.

Summary of Contents for PowerLite 400W

























































































































Search results

Summary of Contents for PowerLite 400W

Reviews:

Related manuals for PowerLite 400W

Brands by name

Popular brands

Epson PowerLite 400W, User Manual

Search results

Summary of Contents for PowerLite 400W

Reviews:

Related manuals for PowerLite 400W

Brands by name

Popular brands