Epson PowerLite 400W User Manual Download Page 100

Page: 100 / 120

100

Monitoring the Projector Over a Network

The following table describes the EMP Monitor status icons.

Group status icons

No warnings or problems in the projector group.

Warning or problem in a projector in the group.

Monitoring disabled. Right click the icon and select

Monitoring Enabled

to begin monitoring the group.

Data is currently being updated.

Type status icons

No warnings or problems.

Warning or problem.

Monitor Password error. No monitor password was
entered when you registered the projector, or an
incorrect password was entered.

Monitoring disabled. Right-click the icon and select

Monitoring Enabled

to monitor the projector.

Data is currently being updated.

Network error (projector is not connected to the
network, the power cable is disconnected, or

Network Off

is selected as the Standby Mode

setting in the Extended menu; see page 62).

Network error (Esc/VP.net communication error).

Power status icons

The projector is powered on; normal status.

The projector is powered off; normal status.

The projector is powered on; abnormal status.

The projector is powered off; abnormal status.

Summary of Contents for PowerLite 400W

























































































































Search results

Summary of Contents for PowerLite 400W

Reviews:

Related manuals for PowerLite 400W

Brands by name

Popular brands

Epson PowerLite 400W, User Manual

Search results

Summary of Contents for PowerLite 400W

Reviews:

Related manuals for PowerLite 400W

Brands by name

Popular brands