247
Parent topic:
Related references
Paper Jam Problems Inside the Product
Paper Jam Problems in the Paper Cassette
Paper Jam Problems in the Duplexer (Rear Cover)
Where to Get Help
Related tasks
Checking for Software Updates
Selecting Advanced Fax Settings
Connecting a Telephone or Answering Machine
Related topics
Refilling Ink
Loading Paper
Wi-Fi or Wired Networking
Status Menu Error Codes
If a job does not complete successfully, you can check the error code. Press the
Estado
button, select ,
and locate the incomplete job. Select the job to display the error code and additional information.
Code
Condition/solution
001
The product was turned off by a power failure.
109
The received fax was already deleted.
110
The job was printed 1-sided because the loaded paper does not support 2-sided printing.
201
The product's memory is full.
You can send pages individually or print received faxes and then delete them to free up
memory space.
202
The line was disconnected by the recipient's fax machine. Wait a moment, then try again.
203
The product cannot detect a dial tone.
Make sure the phone cable is connected correctly and the phone line works. If you
connected the product to a PBX (Private Branch Exchange) phone line or Terminal
Adapter, turn off the
Dial Tone Detection
setting.
Summary of Contents for L1455
