Epson EPL-N4000, Service Manual

Page: 56 / 306

EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 42
Fuser Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the fuser is
replaced. Fuser Counter indicated on the engine status sheet
becomes zero and Fuser Change increments by one.
NOTE: The value of Fuser Counter may become negative due to
Total Counter Clear.
LC1 to 5 Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the LC1 to
5 feed rollers are replaced. LC1 to 5 Counters indicated on the
engine status sheet become zero and LC1 to 5 FR Changes
increment by one.
MP Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the feed
roller of the MP tray is replaced. MP Counter indicated on the
engine status sheet become zero and MP FR Change increment by
one.
TR Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the
transfer roller is replaced. TR Counter on the engine status sheet
become zero and TR Change increments by one.
DM Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the duplex
unit is replaced. Duplex indicated on the engine status sheet
become zero.
FD Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when around
Face-down is replaced. Face-down indicated on the engine status
sheet become zero.
FU Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when around
Face-up indicated on the engine status sheet become zero.
MB Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the
multibin is replaced. Multibin indicated on the engine status sheet
become zero.
Fin Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the finisher
is replaced. Finisher indicated on the engine status sheet become
zero.
Staple Count Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the stapler
is replaced. Stapler indicated on the engine status sheet become
zero.
Error Log Clear (Maintenance Menu)
*2
The error log list stored to be indicated on the engine status sheet is
cleared. The latest 20 error logs are memorized.
NOTE: *
1
: Before executing these operations, the engine must be
stopped completely.
*
2
: After execution, warm boot takes place and the printer
returns to the normal state.