Epson EPL-N4000, Service Manual

Page: 27 / 306

EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 13
Transient Outage: DIP 100% (at rated voltage-100%) 1 cycle
Electrostatic Tolerance: Less than
±
8KV
No damage to image
Surge Current: 1/2-cycle / Not above 100A
Insulation Resistance(TBD): Less than 10 M
Ω
Dielectric Strength: Insulation shall not break down when
the following voltage is applied between
primary circuit and chassis for 1 minute.
Table 1-10. Dielectric strength
Leakage Current: 120V 3.5 mA or less
200V series 3.5 mA or less
1.3.5 Reliability, Durability and Maintainability
MPBF: 400,000 pages (one-side printing)
Print Volume: Maximum 150,000 pages/month
Average 25,000 pages/month
Table 1-11. Paper Feed Reliability
NOTE: a. These figures are measured, assuming normal paper is
used. This measurement does not apply when boundary
face is generated. Boundary face is generated when the
additional paper is added to paper already set.
Printing position reliability
Table 1-12. Printing position
Skew (See the figure on next page)
Table 1-13. Skew
NOTE: The measurements for MP Tray are based on one-side
printing.
Primary-Chassis Primary- Secondary
100/120V AC1000V AC2000V
200 V Series AC1500V AC3000V
Paper Jam Rate
a
Double Feed Rate
Standard
Environment Average of all
environment Standard
Environment Average of all
environment
MP Tray 1/200 1/100 1/100 TBD
Cassette1, 2 1/5000 1/2500 1/5000 1/2500
High capacity
feeder, Cassette 1/5000 1/2500 1/5000 1/2500
One-side printing duplex printing MP Tray*
Main Scan direction
±
2.0mm
±
2.4mm
±
2.9mm
Sub scan direction
±
1.5mm
±
1.9mm
±
2.1mm
One-side printing duplex printing MP Tray*
Main scan direction (
|
c-d
|
)
±
2.0mm
±
2.4mm
±
2.9mm
Sub scan direction (
|
a-b
|
)
±
1.5mm
±
1.9mm
±
2.1mm