Epson EPL-N4000, Service Manual

Page: 185 / 306

EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 171
4.2.26.2 Installation
1. Position the MSI Feed Clutch with the gear facing out, and slide the
Clutch onto the Feed Shaft.
2. Thread the Clutch wire harness through the cutout in the Support
frame.
3. Rotate the Clutch so the notch in the Clutch fits into the key in the
Assembly (Figure on the previous page).
4. Use and E-ring to secure the MSI Feed Clutch to the Feed Shaft.
5. Reinstall the Link Spring onto the Rear Latch (Figure on the
previous page).
6. Slide the MSI Link Gear, along with the MSI Drive Gear Assembly,
onto the idler shaft.
7. Use an E-ring to secure the MSI Link Gear to the idler shaft.
8. Reinstall the Rear Hook Bracket to the Feeder Assembly, and use
one screw to secure the Bracket.
9. Reconnect J208.
10. Reinstall the MSI Tray Support and use a screw to secure it to the
Feeder Assembly.
11. Reinstall the MSI Tray Assembly. (“MSI Tray Assembly” on
page -164)