Useful Functions
60
HDMI Link
HDMI Link Function
When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI1/HDMI2 ports,
you can perform linked operations such as linked power on and volume adjustment for the AV system from
one remote control.
c
•
Connect with a high-speed HDMI cable.
•
When projecting images in WirelessHD, you can use the HDMI link function (EH-LS9600W only).
•
As long as the AV device meets the HDMI CEC standards, you can use the HDMI link function even if
the AV system in-between does not meet the HDMI CEC standards.
•
Some connected devices or functions of those devices may not operate properly even if they meet the
HDMI CEC standards. See the documentation and so on supplied with the connected device for more
information.
Connection example
Projector
Amplifier
Multi-media players and so on
HDMI Link Settings
By pressing the
button on the remote control, and
setting
HDMI Link
to
On
, you can operate the following
functions.
s
Function
Explanation
Power on link
Powers on the projector when content is played back on the connected device. Or,
powers on the connected device when the projector is turned on.
Power off link
Powers off the connected device when the projector is turned off.
•
This only works when the connected device's CEC power link function is enabled.
•
Note that depending on the status of the connected device (for example, if it is record-
ing), the device may not power off.
Input change link
Changes the input source of the projector to HDMI when content is played back on the
connected device.
Connected devices op-
erations
You can perform operations such as Play, Stop, Fast Forward, Rewind, Next Chapter,
Previous Chapter, and Pause from the remote control for the projector.
