Epson EH-LS10000 User Manual Download Page 80

Page: 80 / 135

Useful Functions

Picture in Picture

In Picture in Picture, two different image sources can be projected, one in the main screen (large screen) and
the other in the sub screen (small screen).

Types of Screen that can be Displayed Simultaneously

HDMI1, HDMI2 and WirelessHD are examples of input sources that
can be displayed in Picture in Picture.

Combinations of input sources for Picture in Picture projection

Main Screen

Sub Screen

HDMI1

HDMI2, WirelessHD

HDMI2

HDMI1, WirelessHD

WirelessHD

HDMI1, HDMI2

EH-LS9600W only

The projector uses InstaPrevue Technology from Silicon Image, Inc.

Starting and Exiting Picture in Picture

Starting

Press the

button on the remote control while the projector is projecting.

EH-LS10000

EH-LS9600W

The currently input image is displayed on a Picture in Picture.

Main screen: The current image

Sub screen: The source different from the main screen

Exiting

Press the

button to exit.

•

If the source being input is not supported, nothing is displayed in Picture in Picture.

•

You cannot use Picture in Picture display to project 3D images or 4K images.

•

If a 3D image or a 4K image is input during Picture in Picture display, the Picture in Picture function exits.

Summary of Contents for EH-LS10000








































































































































Search results

Summary of Contents for EH-LS10000

Reviews:

Epson EH-LS10000, User Manual, Page: 80 / 135

Search results

Summary of Contents for EH-LS10000

Reviews: