manualshive.com logo in svg

Epson EH-LS10000, User Manual, Page: 28 / 135

Share
Download
Epson EH-LS10000 User Manual Download Page 28

Basic Operations

27

Turning the Projector On and Off

Turning On

Warning

•

Do not allow small children to make operations. If children do make operations, they must be accompanied
by an adult.

•

Do not look into the lens during projection. Also, do not look into the lens using optical devices (such as a
magnifying glass or telescope). Powerful light can damage your eyes and cause visual impairment. Families
with small children should take particular care.

•

When turning on the projector at a distance using the remote control, make sure there is no one looking into
the lens.

a

Connect the equipment to the
projector.

b

Connect the power cord.

Connect using the power cord supplied.

c

Turn on the connected equipment.

d

Press the button on the remote
control or the control panel to turn on
the projector.

Remote control

Control panel

The lens shutter opens, and projection
starts.

c

When 

Direct Power On

 is set to

On

, you can start projecting by

simply connecting the power cord
to the projector without having to
press any buttons. 

s

 

Settings

 -

Operation

 - 

Direct Power

On

 

 p.91

Attention

When using at an altitude of 1500 m or more, set 

High Altitude Mode

 to 

On

. 

s

 

Settings

 - 

Operation

 -

High Altitude Mode

 

 p.91

Summary of Contents for EH-LS10000








































































































































Reviews:

No comments