Configuration Menu
92
Function
Menu/Settings
Explanation
Lock Setting
Lens Lock
On, Off
When set to
On
, the focus, zoom, and lens shift
settings are locked at their current settings.
If you press the
button when
Lens Lock
is
set to
On
,
is displayed on the screen.
Child Lock
On, Off
This locks the
button on the projector's con-
trol panel to prevent children from turning on
the projector by accident. You can turn on the
power when locked by holding down the
button for approximately three seconds. You can
still turn off the device using the
button, or
perform operations with the remote control as
usual.
If changed, this setting is enabled after you pow-
er off the projector and the cool-down process is
complete.
Note that even if
Child Lock
is set to
On
, the pro-
jector still turns on when the power cord is con-
nected if
Direct Power On
is set to
On
.
Control Panel Lock
On, Off
When set to
On
, all buttons on the control panel
except for the
button are disabled.
is
displayed on the screen if any buttons are press-
ed. To unlock, press and hold the
button on
the control panel for at least 7 seconds.
If changed, this setting is enabled once you close
the Configuration menu.
Projection
Front, Front/Ceiling, Rear, Rear/Ceiling
Change this setting depending on how the pro-
jector is installed.
•
Front
: Select if you are projecting in front of the
screen.
•
Front/Ceiling
: Select if you are projecting in
front of the screen suspended from the ceiling.
•
Rear
: Select if you are projecting to a rear screen
from the back.
•
Rear/Ceiling
: Select if you are projecting to a
rear screen from the back when the projector is
suspended from the ceiling.
User Button
*2
2D-to-3D Conversion, 3D Depth, Inverse
3D Glasses, Power Consumption, Detail
Enhancement, Info
Select a Configuration menu item to assign to the
button on the remote control. By pressing
the
button, the assigned menu item se-
lection/adjustment screen is displayed, allowing
you to make one-touch settings/adjustments.
Picture in Pic-
ture
*3
-
Starts the Picture in Picture display.
s
Standby Mode
Communication On, Communication Off
When set to
Communication On
, you can make
settings and control the projector over the net-
work even when the projector is in standby sta-
tus.
