Appendix
130
Precautions when a Using Laser Device
This projector is a class 2 laser product that complies with the IEC60825-1 international standard on lasers. If
they are not handled correctly, injuries could occur. Note the following points.
Warning
•
If an error occurs in the projector, turn off the power immediately, unplug the projector from the outlet, and
contact your local dealer or the nearest Epson repair center. Continuing to use it in an error condition may
result in an electric shock, fire, or visual impairment.
•
Never attempt to disassemble or modify the projector. The projector contains a high-power laser component.
This could cause serious injury.
•
Do not look into the lens during projection. Also, do not look into the lens using optical devices (such as a
magnifying glass or telescope). This could cause visual impairment.
•
When turning on the projector at a distance using the remote control, make sure there is no one looking into
the lens.
•
Do not allow small children to make operations. If children do make operations, they must be accompanied
by an adult.
•
Do not apply optical devices, such as a magnifying glass or reflector, to the projected image. Continuing to
use it in this condition may result in physical harm. It could also cause a fire or an accident.
•
Before starting projection, check that there is nothing in the surrounding area that could reflect the projected
image.
•
When disposing of the projector, do not disassemble it. Dispose in accordance with your local or national
laws and regulations.
There is a label affixed to the projector to indicate that it is a Class 2 laser product.
The label contains the following information.
•
Invisible laser radiation
•
Do not stare into beam or view directly with optical instruments
•
Class 2 laser product
•
Pulse width
The label is placed in the following location.
EH-LS10000
EH-LS9600W
