Epson EH-LS10000 User Manual Download Page 115

Page: 115 / 135

Maintenance

114

Remove the air filter.

Grip the knob in the center of the air filter
and pull it out at an angle.

Hold the air filter with the surface
facing down and tap it 4 or 5 times to
remove the dust.

Turn it over and tap the other side in the
same way.

Attention

If the air filter is hit too hard, it may
become unusable due to deformities
and cracks.

Remove any dust remaining on the air
filter by using a vacuum cleaner from
the front side.

Replace the air filter if a message is
displayed even after cleaning the
air filter, or if it is still soiled.

p.116

Install the air filter.

Grip the air filter by the knob in the center
and insert it at an angle.

Close the air filter cover.

Press until the tab on the air filter cover
clicks into place.

Summary of Contents for EH-LS10000








































































































































Search results

Summary of Contents for EH-LS10000

Reviews:

Related manuals for EH-LS10000

Brands by name

Popular brands

Epson EH-LS10000, User Manual

Search results

Summary of Contents for EH-LS10000

Reviews:

Related manuals for EH-LS10000

Brands by name

Popular brands