Epson EH-LS10000 User Manual Download Page 62

Page: 62 / 135

Useful Functions

•

To use the HDMI Link function, you must configure the connected device. See the documentation
supplied with the connected device for more information.

•

When using the WirelessHD Transmitter, make the following settings when you want to use the power
on/off link function (EH-LS9600W only).

Power On Link

Device -> PJ

Bidirectional

WirelessHD

Selecting the Connected Device

Display a list of the devices that can be operated with the HDMI link function, and then select the device you
want to use.

Press the

button, and then select

Device Connections

The

Device Connections

list is displayed.

Devices that have a green icon to their left
are linked.

If the device name cannot be determined
this field is left blank.

Only one AV amplifier is
recognized. If multiple amplifiers
are connected, the amplifier
recognized first is displayed.

Select the device you want to operate
using the HDMI Link function.

Summary of Contents for EH-LS10000








































































































































Search results

Summary of Contents for EH-LS10000

Reviews:

Related manuals for EH-LS10000

Brands by name

Popular brands

Epson EH-LS10000, User Manual

Search results

Summary of Contents for EH-LS10000

Reviews:

Related manuals for EH-LS10000

Brands by name

Popular brands