Epson EB-696Ui User Manual Download Page 45

Page: 45 / 251

Turning Off the Projector

Turn off the projector after use.

• Turn off this product when it is not in use to prolong the life of the

projector. Lamp life varies depending on the mode selected,

environmental conditions, and usage. Brightness decreases over time.

Press the power button on the control panel or remote control.
The projector displays a shutdown confirmation screen.

Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the lamp turns off, and the status indicator

turns off.

To transport or store the projector, make sure the power indicator is

blue (but not flashing) and the status indicator is off, then unplug the

power cord.

Summary of Contents for EB-696Ui




























































































































































































































































Search results

Summary of Contents for EB-696Ui

Reviews:

Related manuals for EB-696Ui

Brands by name

Popular brands

Epson EB-696Ui, User Manual

Search results

Summary of Contents for EB-696Ui

Reviews:

Related manuals for EB-696Ui

Brands by name

Popular brands