Epson EB-570 Page 77 User Manual Download

Page: 77 / 201

The following screen appears.

Adjust the focus if necessary, by opening the air filter cover on the
side of the projector and sliding the focus lever.

Press the [Enter] button to select

Yes

A flashing green circle appears in the upper left corner of your
projected image.

Touch the center of the circle with the tip of the pen.

The circle disappears, and you see another circle below the first
one.

For the most accurate calibration, make sure you touch the
center of the circle.

Touch  the  center  of  the  next  circle,  then  repeat.  When  you  get  to
the  bottom  of  the  column,  the  next  circle  appears  at  the  top  of  a
new  column.

Using the Interactive Pens

http://www.pureglare.com.au

Summary of Contents for EB-570










































































































































































































Search results

Summary of Contents for EB-570

Reviews:

Related manuals for EB-570

Brands by name

Popular brands

Epson EB-570, User Manual

Search results

Summary of Contents for EB-570

Reviews:

Related manuals for EB-570

Brands by name

Popular brands