manualshive.com logo in svg

Epson EB-570, User Manual, Page: 164 / 201

Share
Download
Epson EB-570 User Manual Download Page 164

The   Response   Time   for   the   Interactive   Pen   Is   Slow   (only   when   Projecting   USB   Display)

Check

Remedy

Is Windows Aero enabled? (Windows 7 and Windows Vista only)

Interactive pen operations may be slow when Windows Aero is enabled. Disable Windows Aero on the computer being
used.
Click 

All Programs

 - 

EPSON Projector

 - 

Epson USB Display

 - 

Epson USB Display Ver.x.xx Settings

, and then select

the 

Disable Windows Aero and improve the tracking of the interactive pen.

 checkbox.

Cannot  Perform  Touch  Operations  Correctly  (EB-595Wi  only)

Check

Remedy

Is the Touch Unit installed correctly?

The Touch Unit may not be installed correctly. For more details, see the supplied 

Installation Guide

.

s

 

Installation Guide

Is the Touch Unit turned on?

Check that the indicator on the Touch Unit is lit blue. If the indicator on the Touch Unit is not on, check that 

Touch Unit

Setup

 - 

Power

 is set to 

On

 from the Configuration menu.

s

 

Extended

 - 

Easy Interactive Function

 - 

Touch Unit Setup

 - 

Power

 

p.135

s

 

Installation Guide

Has angle adjustment been performed for the Touch Unit?

Perform angle adjustment for the Touch Unit from the Configuration menu. For more details, see the supplied

Installation Guide

.

s

 

Extended

 - 

Easy Interactive Function

 - 

Touch Unit Setup

 - 

Angle Adjustment

 

p.135

s

 

Installation Guide

Has the system been calibrated for touch operations?

If the position you touch and the position touched on the screen do not match, perform 

Touch Calibration

 from the

Configuration menu.

s

 "Calibrating for Touch Operations with Your Finger" 

p.82

Are there any pen trays, interactive pens, or whiteboard erasers
within 2 cm around the projection screen?

Remove any obstacles from around the screen. If there are any obstacles that are difficult to move, attach the infrared
deflectors to the screen. For more details, see the supplied 

Installation Guide

.

s

 

Installation Guide

Are there any people or obstacles around the screen?

If there are any people within 10 cm in front of or around the projection screen or any obstacles causing interference, the
Touch Unit cannot recognize the touch commands correctly.

Is clothing, or any part of your body, close to or touching the screen? If clothing, or any part of your body comes close to the screen, the touch operations may not work correctly. Move at least

1 cm away from the screen.

Are there any remote controls or interactive pens emitting infrared
rays near the projection screen?

Emitting infrared rays near the projection screen may cause the Touch Unit to malfunction. Turn off the light source that
is emitting infrared rays and store unused interactive pens away from the screen.

Problem Solving

164

http://www.pureglare.com.au

Summary of Contents for EB-570










































































































































































































Reviews:

No comments