Epson EB-570 Page 12 User Manual Download

Page: 12 / 201

Top/Side

Name

Function

Air filter cover
open/close lever

Opens and closes the air filter cover.

Wireless LAN indicator

Indicates the access status to the optional wireless LAN
unit.

Name

Function

Easy Interactive
Function receiver

(EB-595Wi/EB-585Wi/
EB-575Wi only)

Receives signals from the interactive pen.

"Using the Interactive Features

(EB-595Wi/EB-585Wi/EB-575Wi only)"

p.64

Obstacle sensor

Detects obstacles that are interfering with the projection
area.

"Cleaning the Obstacle Sensor"

p.171

Remote receiver

Receives signals from the remote control.

Projection window

Projects images.

Warning

•

Do not look into the projection window while
projecting.

•

Do not place any objects or put your hand near
the projection window. It could cause burns,
fire, or the object to warp because this area rea‐
ches a high temperature due to the concentrated
projection light.

Security slot

The security slot is compatible with the Microsaver
Security System manufactured by Kensington.

"Anti-Theft Lock"

p.113

Air filter cover

Open when changing the air filter or operating the focus
lever.

Air intake vent
(air filter)

Takes in air to cool the projector internally.

"Cleaning the Air Filter"

p.172

"Replacing the Air Filter"

p.179

Focus lever

Adjusts the image focus.
Open the air filter cover to operate.

Part Names and Functions

http://www.pureglare.com.au

Summary of Contents for EB-570










































































































































































































Search results

Summary of Contents for EB-570

Reviews:

Related manuals for EB-570

Brands by name

Popular brands

Epson EB-570, User Manual

Search results

Summary of Contents for EB-570

Reviews:

Related manuals for EB-570

Brands by name

Popular brands