Epson EB-570 Page 76 User Manual Download

Page: 76 / 201

Adjust the focus if necessary, by opening the air filter cover on the
side of the projector and sliding the focus lever.

Press the [Enter] button to select

Yes

A pattern appears then disappears, and the system is calibrated. If
you see a message that calibration failed, you need to calibrate
manually.

The cursor location and pen position should match after calibration. If not,
you may need to calibrate manually.

Calibrating Manually

If the cursor location and pen position do not match after auto calibration,
you can calibrate manually.

Press the [Menu] button, select the

Extended

menu, and press

the [Enter] button.

Select the

Easy Interactive Function

setting and press the [Enter]

button.

Select

Manual Calibration

and press the [Enter] button.

Using the Interactive Pens

http://www.pureglare.com.au

Summary of Contents for EB-570










































































































































































































Search results

Summary of Contents for EB-570

Reviews:

Related manuals for EB-570

Brands by name

Popular brands

Epson EB-570, User Manual

Search results

Summary of Contents for EB-570

Reviews:

Related manuals for EB-570

Brands by name

Popular brands