101
Administration and Management
The initialization operation begins. Initialization takes two to three minutes.
When initialization is finished, [Please register an administrator] appears on the LCD. Perform the following work
and configure the settings that are required to use the product.
•
Use the control panel to configure the network settings (see “Use the control panel to configure the network
settings” in the
PP-100N Administrator’s Guide
)
•
Registering an administrator (see “Registering an administrator” in the
PP-100N Administrator’s Guide
)
•
System settings (see “System settings” in the
PP-100N Administrator’s Guide
)
•
Never turn the power off during initialization.
•
The operation of this product differs depending on the Publish Mode setting. To prevent
the occurrence of an unexpected warning or error, check that the correct Publish
Mode has been set after you change the Publish Mode.
After you change the Publish Mode, you can change the language setting for messages
displayed on the LCD of this product from English to Spanish, French, Italian, Dutch,
Portuguese, Japanese, or German. See “Setting the language” on page 62 in this guide if
you want to change the language setting.
Notes
