manualshive.com logo in svg

Epson Disc producer PP-100N Security, Administrator'S Manual

Share
Download
Epson Disc producer PP-100N Security Administrator'S Manual Download Page 126

126

Problems and their remedies

Power/Control Panel problems

Symptom/Problem Status

Check/Remedy Procedure

The power does not turn on. 

Hold down the power button for a moment. 

Is the power plug disconnected from the outlet?

Check if the plug is inserted only halfway or inserted at a slant. 

Are you using a power strip or similar device?

Insert the power plug directly into the wall outlet. 

Is power being supplied from the outlet?

Insert the power plug for another electronic product to check if power 

is being supplied.

The power does not turn off. 

Is the product in one of the states below?

The power cannot be turned off when in one of the states below. 

•

A job is currently being processed. 

•

A published disc is left in Stacker 2. 

•

The disc cover is open. 

•

The disc cover is not locked. 

Did you just turn on the power?

The power cannot be turned off for about 15 minutes once the power 

is turned on. 

The power turns off automatically 15 minutes after “Power off Please 

wait” appears on the LCD.

If you hold down the power button for a moment (at least 3 seconds), 

the power off process begins immediately.

Are the power LED and ERROR LED flashing?

If the power LED and ERROR LED are flashing, hold down the power 

button for a moment (at least 3 seconds). If you enter the user number 

and PIN of the administrator in the user number and PIN input message 

that appears, the power off process begins immediately.

A rattling sound is made when 

the power is turned on. 

Is there a foreign object (such as blue protective tape for transporting) 

inside the product?

Press the power button to turn off the power, and then open the disc 

cover and check that there are no foreign objects inside. 

“EPSON PP-100N” remains 

displayed and the product 

does not work when the power 

is turned on.

Repair is required.

Please contact Customer Support.

ERROR LED flashes/turns on. 

An error has occurred. 

See “Error messages and remedies” on page 119 in this guide. 

Summary of Contents for Disc producer PP-100N Security


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands