Epson Disc producer PP-100N Security Administrator'S Manual Download Page 123

Page: 123 / 153

123

Troubleshooting

Ink problem

(C,LC,LM,M,Y,K)

An invalid ink cartridge is installed.

Replace the cartridge of the displayed color.

(See

“Changing the ink cartridge” in the

PP-100N Security User’s

Guide

Internal drive

error (DRV 1/2)

Turn off the power, and then turn it on again. (The

administrator user number and PIN must be entered to turn

off the power.)

If the same error message still appears, repair

is required. Please contact Customer Support.

Internal printer

error

Turn off the power, and then turn it on again. (The

administrator user number and PIN must be entered to turn

off the power.)

If the same error message still appears, repair

is required. Please contact Customer Support.

Internal

autoloader error

Perform the procedure below.

1. Turn off the power.

2. Open the disc cover, and check if any dust or foreign

objects are inside.

3. Turn on the power.

If the same error message still appears, repair is required.

Please contact Customer Support.

Invalid

state error

Turn off the power, and then turn it on again. (The

administrator user number and PIN must be entered to turn

off the power.)

If the same error message still appears, repair

is required. Please contact Customer Support.

Keypad

connection error

Correctly connect the authentication keypad.

(See

“Connecting the authentication keypad” on page 21 in this

guide.)

No disc

ST1

Load discs into the input stacker (Stacker 1).

(See “Loading

discs” on page 67 in this guide)

No ink cartridge

(C,LC,LM,M,Y,K)

The ink cartridge of the displayed color is not installed, or is

not installed correctly.

Correctly install the cartridge of the displayed color.

(See

“Changing the ink cartridge” in the

PP-100N Security User’s

Guide

No stacker

ST1, ST2

Load the displayed stacker, and close the disc cover.

(See

“Installing the stackers” on page 32 in this guide.)

Error Message

Remedy

Notification

Sound

Summary of Contents for Disc producer PP-100N Security


























































































































































Search results

Summary of Contents for Disc producer PP-100N Security

Reviews:

Related manuals for Disc producer PP-100N Security

Brands by name

Popular brands

Epson Disc producer PP-100N Security, Administrator'S Manual

Search results

Summary of Contents for Disc producer PP-100N Security

Reviews:

Related manuals for Disc producer PP-100N Security

Brands by name

Popular brands