Epson Disc producer PP-100N Security Administrator'S Manual Download Page 122

Page: 122 / 153

122

Disc pickup

error (PRN)

The disc in the printer tray cannot be picked up.

Turn off the

power, and then turn it on again. (The administrator user

number and PIN must be entered to turn off the power.)

If the

same error message still appears, repair is required. Please

contact Customer Support.

Disc pickup

error (ST1/2)

The arm cannot pick up the disc in the stacker.

If the ERROR LED is flashing, fan the discs of Stacker 1 well,

and reload the discs.

If the ERROR LED is flashing, turn the product off and then

back on again. (The administrator user number and PIN must

be entered to turn off the power.)

If the same error message

still appears, repair is required. Please contact Epson

Information Center.

Disc release

error

The arm cannot release the disc.

Do not remove the disc by hand. This could damage the

arm. Turn off the power of the product, and then turn it on

again. During the initialization operation of the product, the

arm releases the disc.

If the same error message still

appears, repair is required. Please contact Customer

Support.

Disc remaining

Cannot turn off

Press the

button or CANCEL button to remove all discs

remaining in Stacker 2, and then turn off the power.

The

power cannot be turned off when a published disc is left

inside the product.

Drive tray

open/close error

-When the drive tray does not come out-

Turn off the power, and then turn it on again. If the drive trays

still does not come out, see “Drive tray does not come out”

on page 138 in this guide.

If the same error message appears

again, repair is required. Please contact Customer Support.

-When the drive tray does not close-

Remove any remaining discs, turn off the power, and then

turn on the power again.

If the same error message still

appears, repair is required. Please contact Customer

Support.

Fan control

error

Turn off the power, and then turn it on again. (The

administrator user number and PIN must be entered to turn

off the power.)

If the same error message still appears, repair

is required. Please contact Customer Support.

Ink cartridge

cover open

Close the ink cartridge cover.

This product is currently operating.

Close the ink cartridge cover.

Error Message

Remedy

Notification

Sound

Summary of Contents for Disc producer PP-100N Security


























































































































































Search results

Summary of Contents for Disc producer PP-100N Security

Reviews:

Related manuals for Disc producer PP-100N Security

Brands by name

Popular brands

Epson Disc producer PP-100N Security, Administrator'S Manual

Search results

Summary of Contents for Disc producer PP-100N Security

Reviews:

Related manuals for Disc producer PP-100N Security

Brands by name

Popular brands