AcuLaser C2800 Series
User's Guide
Troubleshooting
253
Printing in the PCL6/5 Mode Problems
The problems listed in this section are those that you may encounter when printing in the PCL6
mode. All procedural instructions, refer to the PCL6 printer driver.
The printer does not print
The printer does not print correctly in the PCL mode
The font on the printout is different from that on the screen
The edges of texts and/or images are not smooth
Cause
What to do
The
Print to file
check box is selected in the Print
dialog box.
Clear the
Print to file
check box in the Print dialog box.
Cause
What to do
(PCL5c mode only)
Graphics Mode
may be set to
HP-GL/2
and the printing data may include the
data that cannot be printed in the setting.
Access the printer driver, click the
General
tab, click
Options
,
then select
Raster as Graphics Mode
.
Image Optimum
may be set to
Auto
or
On
and the
printing data may include the data that cannot
be printed in the setting.
Access the
Printing Menu
on your printer's control panel, then set
Image Optimum
to Off.
Cause
What to do
The EPSON screen fonts are not installed.
The screen fonts must be installed on the computer that you are
using. Otherwise, the font that you select is substituted by some
other font for display on the screen.
Cause
What to do
The resolution is set to
Fast (300 dpi)
.
Access the printer driver, click the
Print Quality
tab, then select
Fine (600 dpi)
as the resolution.
The printer does not have sufficient memory.
Increase the printer memory.
The RITech is set to
Off
.
Access the printer driver, click the
Print Quality
tab, then select
On
for RITech from the drop-down list.
Downloaded from ManualsPrinter.com Manuals
