Epson C2800 User Manual Download Page 213

Page: 213 / 275

AcuLaser C2800 Series

User's Guide

Replacing Consumable Products

213

Transfer Unit

Handling precautions

Always observe the following handling precautions when replacing the consumable products.

Do not touch the surface of the consumable product. Doing so may impair print quality.

Warning:

❏

Do not dispose of the used consumable products in fire, as it may explode and cause injury.
Dispose of it according to local regulations.

❏

Keep the consumable products out of the reach of children.

Replacing the transfer unit

Follow the steps below to replace the transfer unit.

1. Press the latch on the front cover and open the cover.

Caution:

❏

Do not leave the front cover open for more than five minutes to avoid exposing the imaging
cartridges to light.

❏

Do not expose the imaging cartridges to sunlight at all.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for C2800




















































































































































































































































































Search results

Summary of Contents for C2800

Reviews:

Related manuals for C2800

Brands by name

Popular brands

Epson C2800, User Manual

Search results

Summary of Contents for C2800

Reviews:

Related manuals for C2800

Brands by name

Popular brands