manualshive.com logo in svg

Epson C2800, User Manual

Share
Download
Epson C2800 User Manual Download Page 18

AcuLaser C2800 Series

User's Guide

Safety Instructions

18

❏

Do not use printer in a damp environment.

❏

Do not leave jammed paper inside of the printer. This can cause the printer to overheat.

❏

Never push objects of any kind through cabinet slots as they may touch dangerous voltage 
points or short out parts that could result in a risk of fire or electric shock.

❏

Never spill liquid of any kind on the printer.

❏

Except as specifically explained in the printer’s documentation, do not attempt to service this 
product yourself.

❏

Adjust only those controls that are covered by the operating instructions. Improper adjustment 
of other controls may result in damage and may require repair by a qualified service 
representative.

Safety Information

Power cord

c

Caution:

Be sure the AC power cord meets the relevant local safety standards.
Use only the power cord that comes with this product. Use of the another cord may result in fire or 
electric shock.
This product’s power cord is for use with this product only. Use with other equipment may result in 
fire or electric shock.

Laser safety labels

w

Warning:

The performance of procedures and adjustments other than those specified in the printer’s 
documentation may result in hazardous radiation exposure.
Your printer is a Class 1 laser product as defined in the IEC60825 specifications. The label shown is 
attached to the back of the printer in countries where required.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for C2800




















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands