AcuLaser C2800 Series
User's Guide
Paper Handling
44
❏
If transparencies are loaded incorrectly, the message
Check Transparency
appears on the LCD
panel. To clear the error, see “Transparencies are output blank from the MP tray” on page 240.
c
Caution:
Sheets that have just been printed on may be hot.
EPSON Color Laser Coated Paper
Printing on EPSON Color Laser Coated Paper produces glossier and higher quality printouts.
When loading EPSON Color Laser Coated Paper, you should make paper settings as shown below:
❏
Make settings on the Basic Settings in the printer driver.
Note:
❏
Duplex printing is not available for EPSON Color Laser Coated Paper.
❏
When printing on EPSON Color Laser Coated Paper, you cannot set the print quality to
Maximum
.
❏
You can also make these settings on the
Tray Menu
in the control panel. See “Tray Menu” on
page 150.
❏
EPSON Color Laser Coated Paper may not be fed properly, depending on the temperature and
humidity condition, because it is coated with the special materials. If this happens, load it one
sheet at a time from the MP tray.
Envelopes
The print quality of envelopes may be irregular because different parts of an envelope have
different thicknesses. Print one or two envelopes to check the print quality.
c
Caution:
Do not use window envelopes. The plastic on most window envelopes will melt when it comes into
contact with the fuser.
Note:
❏
Depending on the quality of envelopes, the printing environment, or the printing procedure, envelopes
might be wrinkled. Make a trial print run before you print on a lot of envelopes.
Paper Size:
A4
Paper Source:
MP Tray
(up to 15 mm thick stack)
Paper Type:
Coated
Downloaded from ManualsPrinter.com Manuals
