manualshive.com logo in svg

Epson C2800, User Manual

Share
Download
Epson C2800 User Manual Download Page 17

AcuLaser C2800 Series

User's Guide

Safety Instructions

17

❏

Avoid using outlets that other appliances are plugged into.

❏

Use the type of power source indicated on the label. If you are not sure of the type of power 
available, consult your dealer or local power company.

❏

If you are unable to insert the plug into the outlet, contact a qualified electrician.

❏

When connecting this product to a computer or other device with a cable, ensure the correct 
orientation of the connectors. Each connector has only one correct orientation. Inserting a 
connector in the wrong orientation may damage both devices connected by the cable.

❏

If you use an extension cord, make sure that the total of the ampere ratings on the products 
plugged into the extension cord does not exceed the extension cord ampere rating.

❏

Unplug this printer from the wall outlet and refer servicing to a qualified service representative 
under the following conditions:

When using the printer 

❏

The printer weighs about 28 kg (61.7 lb). One person should not attempt to lift or carry the 
printer. Two people should carry it.

❏

Follow all warnings and instructions marked on the printer.

❏

Unplug this printer from the wall outlet before cleaning.

❏

Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.

❏

Avoid touching the components inside the printer unless instructed to do so in this guide.

❏

Never force printer components into place. Although the printer is designed to be sturdy, 
rough handling can damage it.

❏

Be sure to keep consumables out of the reach of children.

A.

When the power cord or plug is damaged or frayed.

B.

If liquid has been spilled into it.

C.

If it has been exposed to rain or water.

D.

If it does not operate normally when the operating instructions are followed. Adjust only 
those controls that are covered by the operating instructions since improper adjustment 
of other controls may result in damage and will often require extensive work by a 
qualified technician to restore the product to normal operation.

E.

If it has been dropped or the cabinet has been damaged.

F.

If it exhibits a distinct change in performance, indicating a need for service.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for C2800




















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands