manualshive.com logo in svg

Epson C2800, User Manual

Share
Download
Epson C2800 User Manual Download Page 203

AcuLaser C2800 Series

User's Guide

Replacing Consumable Products

203

❏

Do not expose the imaging cartridge to sunlight at all and avoid exposing it to room light for 
more than five minutes. Exposure to light can damage the drum, causing dark or light areas to 
appear on the printed page and reducing the service life of the drum.

w

Warning:

❏

Do not touch the toner. Keep the toner away from your eyes. If toner gets on your skin or 
clothes, wash it off with soap and water immediately.

❏

Keep consumable products out of the reach of children.

❏

Do not dispose of used consumable products in fire, as they may explode and cause injury. 
Dispose of them according to local regulations.

❏

If toner is spilled, use a broom and dustpan or a damp cloth with soap and water to clean it up. 
Because the fine particles can cause a fire or explosion if they come into contact with a spark, 
do not use a vacuum cleaner.

Replacing an imaging cartridge

Follow the steps below to replace an imaging cartridge.

1. Confirm the color of the imaging cartridge that needs to be replaced by checking the LCD panel 

or EPSON Status Monitor.

2. Press the latch on the front cover and open the cover.

c

Caution:

❏

Do not leave the front cover open for more than five minutes to avoid exposing the imaging 
cartridges to light.

❏

Do not expose the imaging cartridges to sunlight at all.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for C2800




















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands