![Epson C2800 User Manual Download Page 179](http://html.mh-extra.com/html/epson/c2800/c2800_user-manual_108840179.webp)
AcuLaser C2800 Series
User's Guide
Using the Control Panel
179
Replace Toner uuuu
The indicated imaging cartridges have reached the end of its service life and need to be replaced.
(The letters C, M, Y, or K appear in place of
uuuu
and indicate the colors Cyan, Magenta, Yellow,
and Black respectively.)
When the error light turns on, you cannot continue printing. Replace the imaging cartridge with a
new one. See “Imaging Cartridge” on page 202 for instructions.
When the error light is blinking, you can continue printing in the black and white mode by
pressing the
N
Start/Stop
button, or you can cancel the print job by pressing the
+
Cancel Job
button.
Replace Transfer Unit
The transfer unit has reached the end of its service life and needs to be replaced.
When the error light turns on, you cannot continue printing. Turn off the printer, then replace the
transfer unit with a new one. See “Transfer Unit” on page 213 for instructions. The error clears
automatically after you replace the unit and close all printer covers.
Reserve Job Canceled
The printer cannot store the data of your print job using the Reserve Job function. The maximum
number of print jobs stored on the printer’s memory has been reached, or the memory has no more
memory available to store a new job. To store a new print job, delete a previously stored job. Also,
if you have any Confidential Jobs stored, printing those jobs will make more memory available.
You may also increase the available memory space by changing the
RAM Disk
setting to
Normal
or
Maximum
. For details, see “Setup Menu” on page 153.
To clear this error, select
Clear Warning
from the control panel’s
Reset Menu
. For instruction
about accessing the control panel menus, see “How to access the control panel menus” on page 146.
Reset
The printer’s current interface has been reset and the buffer has been cleared. However, other
interfaces are still active and retain their settings and data.
Reset All
All printer settings have been reset to the default configuration, or to the last settings that were
saved.
Downloaded from ManualsPrinter.com Manuals