Epson C2800 User Manual Download Page 225

Page: 225 / 275

AcuLaser C2800 Series

User's Guide

Troubleshooting

225

❏

Do not touch the transfer belt and light-sensitive drums to avoid damaging them.

a. light-sensitive drums
b. transfer belt

Warning:

❏

Be careful not to touch the fuser, which is marked

CAUTION HIGH TEMPERATURE

, or the

surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very
hot.

❏

Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.

Paper Jam MP C1 A

1. Remove all the paper from the MP tray.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for C2800




















































































































































































































































































Search results

Summary of Contents for C2800

Reviews:

Related manuals for C2800

Brands by name

Popular brands

Epson C2800, User Manual

Search results

Summary of Contents for C2800

Reviews:

Related manuals for C2800

Brands by name

Popular brands