Item
Explanation
T.Margin
Sets the distance from the top of the page to the baseline of the first printable line. The
distance is measured in inches. The smaller the value, the closer the printable line is to the
top.
Settings (default in bold):
0.40 ...
0.50
... 1.50 inch in 0.05-inch increments
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you
change the
Orientation
,
Page Size
, or
T.Margin
settings, the page length setting
automatically returns to the default for each paper size.
Settings (default in bold):
1 ...
66
Lines
CGTable
Use the character generator (CG) table option to select the graphics character table or the
italics table. The graphics table contains graphic characters for printing lines, corners,
shaded areas, international characters, Greek characters, and mathematical symbols. If
you select
Italic
, the upper half of the character table is defined as italic characters.
Settings (default in bold):
PcUSA
, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic,
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO,
PcSl437,PcTurkish1, 8859-9 ISO, Mazowia, CodeMJK, PcGk437, PcGk851, PcGk869, 8859-7
ISO, PcCy855, PcCy866, PcUkr866, PcLit771, Bulgarian, Hebrew7, Hebrew8, PcHe862,
PcAr864, PcAr864Ara, PcAr720, PcLit774, Estonia, ISO Latin2, PcLat866
Country
Use this option to select one of the fifteen international symbol sets. See the
Font Guide
for
samples of the characters in each country’s symbol set.
Settings (default in bold):
USA
, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2,
Spain2,LatinAmeric, Korea, Legal
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation
whenever the printing position goes beyond the right margin. If you select
Off
, the
printer does not print any characters beyond the right margin and does not perform any
line wrapping until it receives carriage-return character. This function is handled
automatically by most applications.
Settings (default in bold):
On
, Off
Auto LF
If you select
Off
, the printer does not send an automatic line-feed (LF) command with
each carriage-return (CR). If
On
is selected, a line-feed command is sent with each
carriage-return. Select
On
if your text lines overlap.
Settings (default in bold):
Off
, On
AL-C300 Series User's Guide
Getting to Know Your Printer
31
