Item
Explanation
USB I/F
Allows you to activate or deactivate the USB interface.
Settings (default in bold):
On
, Off
USB Speed
Allows you to select the operation mode of USB interface. Selecting
HS
is recommended.
Select
FS
if
HS
does not work on your computer system.
Settings (default in bold):
HS
, FS
Buffer Size
Determines the amount of memory to be used for receiving data and printing data.
Note:
❏
To activate Buffer Size settings, you must turn off the printer for more than five
seconds then turn it back on. Or, you can perform a Reset All operation, as
explained in
Reset Menu
.
❏
Resetting the printer erases all print jobs. Make sure the
Ready
light is not
flashing when you reset the printer.
Settings (default in bold):
Normal
, Maximum, Minimum
Network Menu
See the
Network Guide
for each setting.
Note:
After any item in the menu is changed, the setting takes effect after a warm boot or after the power is turned on again. While it is
reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on
again.
USB Host Menu
Note:
After any item in the menu is changed, the setting takes effect after a warm boot or after the power is turned on again. While it is
reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on
again.
Item
Explanation
USB Host
Enables you to print directly from a USB memory via a USB Host interface.
Settings (default in bold):
On
, Off
AL-C300 Series User's Guide
Getting to Know Your Printer
23
