To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
Check Paper Size
The paper size setting is different from the size of paper
loaded in the printer. Check to see if the correct size of
paper is loaded in the specified paper source.
To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
Clear Paper Jam wwww
The location where the paper jam occurred is displayed
at
WWWWW
.
WWWWW
indicates the location of the error.
If a paper jam occurs at two or more locations
simultaneously, the corresponding multiple locations
are displayed.
For details about clearing paper jams, see
Close Cover wwww
The specified cover (
wwww
) does not close securely.
Open the cover once, and then close.
Collate Disabled
Printing by specifying the number of copies is no longer
possible due to a lack of memory (RAM). If this warning
message appears, print only one copy at a time.
To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
CompactFlash Error
The installed CompactFlash memory is not supported
by the printer or you selected
No
when the
Format
Required
was displayed on the control panel. Turn off
the printer and remove the CompactFlash memory. If
Format Required
is displayed on the control panel,
select
Yes
.
CompactFlash Full
The optional CompactFlash memory is full and you
cannot save any data. Delete the unnecessary data from
the CompactFlash memory. To clear this warning
message, select
Clear Warning
from the control
panel’s
Reset Menu
.
Duplex Memory Overflow
(AL-C300DN only)
There is not enough memory for duplex printing. The
printer prints only on the front and ejects the paper. To
clear this error, follow the instructions below.
If
Off
is selected as the
Auto Cont
setting on the control
panel’s
Setup Menu
, press the
OK
button to print on
the back of the next sheet, or cancel the print job. To
cancel the print job, see
If
On
is selected as the
Auto Cont
setting on the control
panel’s
Setup Menu
, printing continues automatically
after a certain period of time.
Feed Roller C1 Needed Soon,
Feed Roller C2 Needed
Soon
This warning message indicates that the feed roller C1
or C2 is near the end of its service life. You can continue
to print until the
Replace Feed Roller C1
or
Replace Feed Roller C2
message appears.
Form Data Canceled
Unable to store form overlay data on the optional
CompactFlash memory. Either the CompactFlash
memory is not installed correctly, or the maximum
number of form overlay files has been reached. Confirm
that the optional CompactFlash memory is installed
correctly, or delete any form overlay files you no longer
need, and then try storing the new overlay again.
To clear this error, select
Clear Warning
from the
control panel’s
Reset Menu
.
Form Feed
The printer is ejecting paper due to a user request. This
message appears when pressing the
Pause/Release
button once, then holding down the
OK
button for
more than 2 seconds because the printer has not
received a form feed command.
Format Required
The installed CompactFlash memory needs to be
formatted to use it with the printer. Select
Yes
to format
the memory, or select
No
to cancel formatting. If you
select
No
,
CompactFlash Error
is displayed and you
cannot use the memory for the printer. In that case, turn
off the printer and remove the CompactFlash memory.
Formatting CF
AL-C300 Series User's Guide
Troubleshooting
61
