The CompactFlash memory is being formatted.
Fuser Needed Soon
This warning message indicates that the fuser unit is
near the end of its service life. You can continue to print
until the
Replace Fuser
message appears.
Image Optimum
There is insufficient memory to print the page at the
specified print quality. The printer automatically lowers
the print quality so that it can continue printing. If the
quality of the printout is not acceptable, try simplifying
the page by limiting the number of graphics or reducing
the number and size of fonts.
To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
Install Fuser
The fuser unit is not installed in the printer. Install the
fuser unit. For details, see the instructions that come
with the fuser unit.
!
Caution:
If the printer has been in use, the fuser and the
surrounding areas may be very hot. If you must touch
one of these areas, turn off the printer and wait 40
minutes to allow the heat to subside before doing so.
Install Photocon uuuu
The photoconductor unit is not installed in the printer.
The letters C, M, Y, or K appear in place of uuuu and
indicate the colors Cyan, Magenta, Yellow, and Black
respectively. Install the photoconductor unit. For
details, see the instructions that come with the
photoconductor unit.
Install uuuu Toner Cartridge
The toner cartridge is not installed in the printer.
The letters C, M, Y, or K appear in place of uuuu and
indicate the colors Cyan, Magenta, Yellow, and Black
respectively. Install the toner cartridge. See the
instructions that come with the toner cartridge.
Invalid Data
The spool file on the driver is deleted while printing or
the data is abnormal. Press the
OK
button to clear the
error.
Invalid N/W Module
There is no network program, or the network program
cannot be used with your printer. Contact a qualified
service representative.
Invalid PS3
There are errors in the ROM module. Turn off the
printer and contact your dealer.
Memory Overflow
The printer has insufficient memory to execute the
current task. Press the
OK
button on the control panel to
resume printing, or cancel the print job. To cancel the
print job, see
“Cancelling a Print Job” on page 54
Need Memory
The printer has insufficient memory to complete the
current print job.
To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
To prevent this problem from recurring, reduce the
resolution of the image to be printed.
Non-Genuine Toner uuuu
The installed toner cartridge is not a genuine Epson
toner cartridge. Installing a genuine toner cartridge is
recommended.
The printout and remaining service lives of the toner
cartridges displayed on the control panel may be
different from those when using genuine Epson toner
cartridges. Epson shall not be liable for any damages or
problems arising from the use of consumable products
not manufactured or approved by Epson.
Press the
OK
button on the control panel to resume
printing.
Not Supported USB Device
Unsupported USB device is connected.
Paper Out tttt sssss
There is no paper in the specified paper source (
tttt
).
Load paper of the size (
sssss
) into the paper source.
Photocon uuuu Needed Soon
AL-C300 Series User's Guide
Troubleshooting
62
