Epson AcuLaser C3900N User Manual Download

Page: 151 / 158

6. Insert the four mounting pins on the hard disk drive into the holes to mount the hard disk drive.

7. Reinstall the panel and tighten two screws.

8. Reconnect all interface cables.

9. Reconnect the power cord, and turn on the printer.

10. Declare the Hard Disk in the Windows printer driver (Properties/Configure tab).

500-Sheet Paper Cassette Unit (C12C802651)

You can install up to one optional 500-sheet paper cassette unit (Tray 3).

Installing a 500-Sheet Paper Cassette Unit

Note:

Since consumables are installed in the printer, be sure to keep the printer level when moving it in order to
prevent accidental spills.

1. Turn off the printer and disconnect the power cord and interface cables.

2. Prepare the 500-sheet paper cassette unit.

Note:

Be sure to place the 500-sheet paper cassette unit on a level surface.

AcuLaser C3900 Series User’s Guide

Installing Accessories

151

Summary of Contents for AcuLaser C3900N































































































































































Search results

Summary of Contents for AcuLaser C3900N

Reviews:

Related manuals for AcuLaser C3900N

Brands by name

Popular brands

Epson AcuLaser C3900N, User Manual

Search results

Summary of Contents for AcuLaser C3900N

Reviews:

Related manuals for AcuLaser C3900N

Brands by name

Popular brands