Chapter 9
Installing Accessories
Introduction
Note:
Use of accessories not manufactured or supported by Epson will void your warranty.
Dual In-Line Memory Module
(DIMM)
512 MB DIMM
500-Sheet Paper Cassette Unit
(Tray 3)
500-sheet tray included
Hard Disk Drive
SATA Hard Disk
Note:
❏
Installing accessories always requires that the printer and accessories are turned off and unplugged
during installation.
❏
This printer does not support CompactFlash card.
Antistatic Protection
Note:
It’s very important to protect the printer controller board from electrostatic damage while performing
any task involving the controller board.
Turn off all power switches first. If an antistatic wrist strap is provided in your printer option kit, attach
one end of it to your wrist and the other end to the bare metal chassis on the back of your printer. Never
attach the wrist strap to any piece of equipment with an electrical current present. Plastic, rubber, wood,
painted metal surfaces, and telephones are not acceptable grounding points.
If you don’t have an antistatic wrist strap, discharge your body’s static electric charge by touching a
grounded surface before you handle any printer boards or components. Also avoid walking around after
grounding yourself.
AcuLaser C3900 Series User’s Guide
Installing Accessories
146