Epson AcuLaser C3900N User Manual Download

Page: 97 / 158

4. Remove the backup battery.

5. Insert a new backup battery.

Note:

❏

When inserting the new backup battery, be sure that the + side faces front.

❏

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
your local regulations.
Do not burn the backup battery.

6. Reinstall the panel and tighten two screws.

7. Reconnect all interface cables.

8. Reconnect the power cord, and turn on the printer.

9. Use

DATE

on the

SYS DEFAULT MENU

CLOCK

menu to set the date, and use

TIME

on the

SYS

DEFAULT MENU

CLOCK

menu to set the time.

AcuLaser C3900 Series User’s Guide

Replacing Consumables and Maintenance Parts

Summary of Contents for AcuLaser C3900N































































































































































Search results

Summary of Contents for AcuLaser C3900N

Reviews:

Related manuals for AcuLaser C3900N

Brands by name

Popular brands

Epson AcuLaser C3900N, User Manual

Search results

Summary of Contents for AcuLaser C3900N

Reviews:

Related manuals for AcuLaser C3900N

Brands by name

Popular brands