Epson AcuLaser C3900N User Manual Download

Page: 93 / 158

Note:

❏

The front lever should be securely returned to its original position; otherwise, the front cover of
the printer cannot be closed.

❏

If it is difficult to operate the lever, push it in.

17. Close the front cover.

Note:

When closing the front cover, press the area of the cover with small projections.

Replacing the Waste Toner Bottle (0595)

When the waste toner bottle becomes full, the message

WASTE TONER FULL

REPLACE BOTTLE

appears in the message window. The printer stops and will not start again until the waste toner bottle is
replaced.

1. Open the printer’s front cover.

AcuLaser C3900 Series User’s Guide

Replacing Consumables and Maintenance Parts

Summary of Contents for AcuLaser C3900N































































































































































Search results

Summary of Contents for AcuLaser C3900N

Reviews:

Related manuals for AcuLaser C3900N

Brands by name

Popular brands

Epson AcuLaser C3900N, User Manual

Search results

Summary of Contents for AcuLaser C3900N

Reviews:

Related manuals for AcuLaser C3900N

Brands by name

Popular brands