Epson AcuLaser C2800D, Service Manual

Page: 390 / 459

EPSON AcuLaser C2800/C2800D/C3800/C3800D Revision C
MAINTENANCE Consumable Products/Products that Require Periodic Replacement 390
Confidential
6.1 Consumable Products/Products that Require Periodic Replacement
CONSUMABLE PRODUCTS
†
AcuLaser C2800/C2800D
Note that the values (printable pages) given in the following tables are guidelines, not an absolute specifications.
The life could become less than a half of the given numbers due to many factors; such as intermittent printing (repeating to print only a few copies for each
print job), paper type (especially thick paper), paper size, paper orientation, print data (image or document), frequent power-on/off, and so on.
Table 6-1. Consumable Products
Product Name Configuration
Product
Code
Service Life
*
(printable pages)
Replacement
Massage
Remark
High capacity imaging cartridge Yellow Toner hopper
Development roller
Photoconductor
Waste toner box
1158 6,000
Replace Toner Y
„
Outer dimensions of high capacity imaging
cartridge and standard capacity imaging
cartridge are the same.
„
When the error LED is flashing, you can
continue printing in monochrome by pressing
the [Start/Stop] button.
„
Printing is impossible when the error LED is lit.
Magenta 1159 6,000 Replace Toner M
Cyan 1160 6,000
Replace Toner C
Black 1161 8,000 Replace Toner K
Standard capacity imaging cartridge Yellow 1162 2,000
Replace Toner Y
Magenta 1163 2,000 Replace Toner M
Cyan 1164 2,000
Replace Toner C
Black 1165 3,000
TRANSFER UNIT Transport belt
Bias transfer roller
Waste toner box
3024 100,000
Replace Transfer Unit
„
Printing is impossible.
„
Replace the unit immediately.
FUSER UNIT (110-120 V) Heat roller
Quarts lamp (for 120 V)
3026 100,000 Replace Fuser
„
The FUSER UNIT has reached the end of its
service life. Replace the unit immediately.
„
You can continue printing, but print quality is
not guaranteed while this message is displayed.
FUSER UNIT (220-240 V) Heat roller
Quarts lamp (for 230 V)
3025 100,000